
During operation, cranes generally extend their outriggers to transfer the equipment's weight and working loads to the ground. Since lifting operations may involve considerable equipment weight, lifting loads, and changes in the center of gravity, the forces acting on the outrigger positions can be highly concentrated. If the outriggers are placed directly on the ground, the risk of localized settlement, cracking, or unstable support may increase. Therefore, outrigger pads are required in many lifting applications as auxiliary supporting components.
First, outrigger pads help distribute concentrated loads generated by crane outriggers. The contact area of a crane outrigger is generally limited, while the equipment's weight and lifting loads must be transferred to the ground through these support points. Using outrigger pads increases the effective contact area, helping distribute the loads more evenly and reducing concentrated pressure on localized ground areas.
Second, outrigger pads help protect working surfaces. Construction sites may have concrete pavement, asphalt surfaces, paved areas, or other types of ground. These surfaces may develop indentations, cracks, or other damage when subjected to concentrated pressure. Outrigger pads create an intermediate supporting interface between the crane outriggers and the ground, helping reduce localized damage caused by direct contact.
Third, outrigger pads help improve equipment support conditions. Cranes need to maintain appropriate support conditions during operation. If the ground beneath an outrigger is uneven or the contact area is insufficient, uneven load distribution may occur, potentially affecting the overall stability of the equipment. Using suitable outrigger pads provides a more complete supporting surface and helps the crane establish support according to its required outrigger configuration.
Fourth, outrigger pads help cranes adapt to different construction environments. At building sites, road construction projects, bridge construction sites, and large equipment installation locations, ground conditions can vary considerably. Some areas have concrete pavement, while others may consist of compacted soil or gravel. Selecting suitable outrigger pads according to site conditions provides additional load distribution and ground protection.
Fifth, outrigger pads help reduce wear and damage caused by direct contact between the outriggers and the ground. At sites where equipment frequently enters, leaves, or changes working positions, the outriggers may come into contact with different ground surfaces repeatedly. Using pads creates an intermediate layer that reduces direct friction between the outriggers and the ground while helping minimize localized surface damage.
In addition, outrigger pads help support more organized crane setup procedures. Properly positioning the pads allows each outrigger to establish the required supporting contact according to the equipment's operating instructions. This also makes it easier for site personnel to inspect the support conditions and manage the working area.
It is important to note that outrigger pads cannot replace ground load-bearing assessments or compensate for improper outrigger positioning. Before crane operation, the ground must be confirmed to have sufficient load-bearing capacity. Potential hazards such as underground voids, trenches, pipelines, and other structural risks must also be identified. Outriggers must be positioned according to the equipment manufacturer's instructions, and appropriate safety measures must be implemented for lifting operations.
Overall, cranes use outrigger pads mainly to distribute concentrated loads, protect ground surfaces, improve supporting contact conditions, and provide auxiliary support for stable equipment operation. They are important auxiliary load-bearing components in crane lifting and construction machinery applications.
